Grading in Chalmette: where the scope usually starts
Drainage-smart finish grades and stable building pads. In Chalmette, the first conversation is usually about access, drainage, and how St. Bernard Parish conditions change the work.
Low-elevation silts and clays near the marsh edge with fill history on many residential blocks.
Grading in this market often has to align with storm-surge awareness and tight setbacks mean elevations and finish grades tie directly to insurance and permitting conversations.
Best when drainage, slope control, and finish tolerance matter as much as speed.
23+
Cities Served
600+
Projects Completed
2wk
Average Start Time
100%
Insured
Local work
Grading in Chalmette and St. Bernard Parish
When a slab edge or walk settles unevenly in Chalmette, the fix usually starts with reading slope and compaction, not just adding fill.
We rough-balance cuts and fills first, then proof-roll soft spots before fine grading in Chalmette. Swales, berms, and outlet points get shaped to match how water actually moves across St. Bernard Parish parcels. On Chalmette coastal lots, Low-elevation silts and clays near the marsh edge with fill history on many residential blocks. Shell-laden lifts need a compaction check before we lock finish grade.
We hold pad edges clean until your flatwork or foundation crew is ready to take the site in Chalmette. If rough and finish need to split around utilities or framing, we quote both passes up front.
Field photos
Grading work like this
Recent photos from similar grading scopes. Local conditions in Chalmette still set the final plan.
Laser-controlled backyard gradeCompacted gravel drivewayCoastal driveway installBackyard cut and pad
St. Bernard Parish: Low-elevation silts and clays near the marsh edge with fill history on many residential blocks.
Grading in Chalmette often pairs with storm-surge awareness and tight setbacks mean elevations and finish grades tie directly to insurance and permitting conversations.
Site review and stakes: we confirm finish elevations, drainage targets, and any utility locates before we cut.
Best when drainage, slope control, and finish tolerance matter as much as speed.
Process
Our Grading process in Chalmette
Clear steps from first call to final walkthrough.
1
Site review and stakes
We confirm finish elevations, drainage targets, and any utility locates before we cut.
2
Rough cut and balance
We move material to balance the site, building pads and swales before fine grading.
3
Fine grade and compaction
We work to plan tolerance, wetting or drying lifts as needed for stable compaction.
4
Walkthrough and punch
We roll the grade with you, address low spots, and leave rakes and edges clean for the next trade.
Pricing
What moves the number in Chalmette
Residential starting point: from about $1,500 for small yard re-slopes
Commercial starting point: quoted by the acre with topo and haul assumptions spelled out
In Chalmette, St. Bernard Parish, grading pricing moves with haul distance, moisture, access, and how much cleanup sits next to the machines. Coastal jobs often need closer attention to stabilization, shell layers, and storm windows. Residential scopes often start from about $1,500 for small yard re-slopes.
Client reviews
What homeowners say about our work
Verified feedback from clients across Louisiana and the Mississippi Gulf Coast.
Verified reviewsLouisiana & MS Gulf Coast
Earthworks Solutions has handled several projects for me over the past couple of years. The work is done right every time. Josh's attention to detail is unmatched, and he goes above and beyond to make sure the customer is fully satisfied. If you're considering Earthworks Solutions, you won't be disappointed.
JH
Jeff H.
Verified client
Josh has handled several projects for us. He built a rock road in our backyard for our boat, and we didn't have to think twice about it. He handled everything from start to finish and the work was excellent. We also had a swimming pool removed, which left our backyard a mess. Josh brought in dirt, regraded the area, and it looks amazing now. We liked his work so much we had him put in a brand new lawn for my mother, including scraping out the old lawn, laying new sod, and installing an irrigation system. Her lawn looks incredible. Josh is efficient, professional, and fairly priced.
KL
Kathy and Rodney L.
Verified client
Josh prepped our double lot and installed sod. Our lawn is now the best in the neighborhood, and we get people slowing down just to look at it. He maintains it without needing any input from us, which we appreciate. The cost was competitive and reasonable.
NH
Niles & Gloria H.
Verified client
Field stories
Grading field stories relevant to Chalmette
These project spotlights explain how similar grading scopes are planned, staged, and handed off in the Gulf Coast market.
Field story
Mississippi tract clearing and grading that expanded the company footprint
A large Mississippi property asked for clearing, underbrushing, and grading work that helped Earthworks Solutions expand from neighborhood service routes into larger land-improvement scopes.
Yard drainage and regrade work that grew into the grading side of the business
Repeated drainage fixes, low-spot corrections, and hand-built regrades showed there was strong demand for thoughtful grading work long before larger machines entered the picture.
These answer-first guides help owners and builders understand pricing, drainage, scope boundaries, and what changes the job.
Field guide
Grading vs. dirt work: what property owners actually need
Grading shapes the final slope and drainage of a site. Dirt work is the broader category that includes excavation, fill placement, haul coordination, and compaction before finish grading happens.
Site prep before a slab or driveway usually means clearing, cut-and-fill balance, compaction, drainage planning, and a finish grade that matches concrete or paving requirements.
Low-elevation silts and clays near the marsh edge with fill history on many residential blocks. That changes machine hours, moisture control, and sometimes import or export fill.
Storm-surge awareness and tight setbacks mean elevations and finish grades tie directly to insurance and permitting conversations. Best when drainage, slope control, and finish tolerance matter as much as speed. Typical scopes range from residential lot prep to commercial site support depending on the corridor and the access.
Small yard re-slopes in Chalmette often wrap in one to three days; larger pad or parking work runs longer based on cut-fill balance.
When Chalmette jobs sit in a flood or drainage district, we align finish elevations with the rules on file before fine grading starts.
For Chalmette builds, we coordinate trench backfill, drive approaches, and final fine grade so concrete schedules stay intact.